# $Header: /var/cvsroot/gentoo-x86/sys-boot/lilo/files/lilo.conf,v 1.2 2004/07/1 
8 04:42:04 dragonheart Exp $ 
# Author: Ultanium 

# 
# Start LILO global section 
# 

# Faster, but won't work on all systems: 
#compact 
# Should work for most systems, and do not have the sector limit: 
lba32 
# If lba32 do not work, use linear: 
#linear 

# MBR to install LILO to: 
boot = /dev/md0 
# Line below make lilo install on MBR of hda and hdb 
# You can replace "/dev/hda,/dev/hdb" as "auto" 
raid-extra-boot=/dev/hda,/dev/hdb 
map = /boot/System.map 

# If you are having problems booting from a hardware raid-array 
# or have a unusual setup, try this: 
#disk=/dev/ataraid/disc0/disc bios=0x80 # see this as the first BIOS disk 
#disk=/dev/sda bios=0x81 # see this as the second BIOS disk 
#disk=/dev/hda bios=0x82 # see this as the third BIOS disk 

# Here you can select the secondary loader to install. A few 
# examples is: 
# 
# boot-text.b 
# boot-menu.b 
# boot-bmp.b 
# 
install = /boot/boot-menu.b # Note that for lilo-22.5.5 or later you 

# do not need boot-{text,menu,bmp}.b in 

# /boot, as they are linked into the lilo 

# binary. 

menu-scheme=Wb 
prompt 
# If you always want to see the prompt with a 15 second timeout: 
timeout = 30 
delay = 30 
default = GL-2.6.19-r5 
# Normal VGA console 
vga = normal 
# VESA console with size 1024x768x16: 
#vga = 791 

# 
# End LILO global section 
# 

# 
# Linux bootable partition config begins 
# If you build your raid and device mapper as modules, you shout add dolvm2 and 
# do dmraid to ensure modules loaded at boot time. So kernel won't fail to mount 
# root file system. 
# 
image = /boot/kernel-genkernel-x86-2.6.19-gentoo-r5 

initrd = /boot/initramfs-genkernel-x86-2.6.19-gentoo-r5 

root = /dev/ram0 

label = GL-2.6.19-r5 

read-only # read-only for checking 

append = "real_root=/dev/md1 init=/linuxrc dolvm2 dodmraid splash=silent" 
# 
# Linux bootable partition config ends 
# 
# 
# DOS bootable partition config begins 
# 
#other = /dev/hda1 
# #other = /devices/discs/disc0/part1 
# label = Windows 
# table = /dev/hda 
# 
# DOS bootable partition config ends 
#